VIBRATION SWITCH MODULE

72.00

QUICK OVERVIEW

This switch at rest is open (off) state when it subjected to an external force touch with an appropriate shaking force, or its movement speed reaches appropriate centrifugal force (eccentric) heart, conductive pins will be in instantaneous conduction state to change the electrical characteristics, and when the external force disappears, electrical characteristics recovery to be open (off) state.

In stock

Description

This switch at rest is open (off) state when it subjected to an external force touch with an appropriate shaking force, or its movement speed reaches appropriate centrifugal force (eccentric) heart, conductive pins will be in instantaneous conduction state to change the electrical characteristics, and when the external force disappears, electrical characteristics recovery to be open (off) state.

This switch by default is in an OFF resting state. When an external force is applied to achieve a proper vibration, the conductive pin will momentarily conduct and change to ON status, make changes in electric property, and disappear when the external force is withdrawn. Its omnidirectional in nature meaning any angle can trigger the sensor.

Pin Connection

Pin – ⇔ GND, connect to GND of the Arduino
Middle Pin ⇔ +5 v, connect to Arduino +5
Pin S ⇔ signal, connect to Arduino pin 10 

 

Features :

  1. No direction, any angle can trigger the work.
  2. Sensitivity switches can be selected for the trigger sensitivity according to circuit requirements.
  3. This switch is suitable for the trigger of the small current circuit.

Additional information

Weight 100 g
Dimensions 16 × 29 × 31 cm

Reviews

There are no reviews yet.

Be the first to review “VIBRATION SWITCH MODULE”
X